UPC EETAC Bachelor's Degree in Telecommunications Systems and in Network Engineering EEL



PLA11: Design phase #2 and phase #3: Adding LCD and TMR2



NOTE: This post lab assignment must be solved only after having completed successfully lab session Lab11 because you will copy and adapt materials from it.

Specifications (design phases #2 and #3)

Students will be asked to continue solving the PLA10 project adapted to the microcontroler PIC18F4520. To do so, the previous project's design phase #1 must be working correctly. If this is not yet the case, complete the design phase #1. And then add the project features stated in design phases #2 and #3. Use the options indicated by your instructor.

Example of individual/group assignments
  Project number Circuit entity  
Est./group 1 D3.5 LED lamp dimmer  
Est./group 2 D3.6 7-segment sequencer  
Est./group 3 D3.23 Earbuds control buttons  
Est./group 4 D3.5 LED lamp dimmer  
Est./group 5 D3.6 7-segment sequencer  
··· ··· ···  


Use the options indicated by your instructor. Follow this rubric for writing reports.


P_Ch3 marking grid for projects PLA9, PLA10 and PLA11

P_Ch3 => 10 %     => PLA9 (20%) + PLA10 (30%) + PLA11 (work in progress + report + video, 50%)

Work assessments to be carried out in laboratory sessions:
  PLA9 PLA10    
  2p 3p    


PLA11 (5p)
Work in progress (in session Lab AR) Report Video
  1.5p 2p 1.5p  

Note on lab assessment: student grades are not simply reflecting report or video quality, but implicitly, they include laboratory participation, questions and answers, problem solving skills, attendance and punctuality, active attitude and group work.


Reflect and give us your group feedback on what you learned in chapter 3 (from P9 to P12) or through the complete CSd course. Add a short paragraph in the final section of your PLA11 discussing aspects that you consider positive and negative.